DC600 powersource bells weldgen

DC600 Powersource

10 Available for Hire/Rent
Download Rental Agreement

Or call 0499 974 772




Rugged construction, simple controls and a 100% duty cycle output rating make these machines a sound investment for heavy duty shop applications. Add the outstanding traditional SCR rectifier arc action delivering high quality, attractive welds and your operators will agree – it’s hard to go wrong with an Idealarc® 600.

  • Full range output voltage control for easy operation and precise control.
  • Standard analog ammeter and voltmeter.
  • VRD™ (Voltage Reduction Device™) reduces OCV (open circuit voltage) when not welding for added safety (select models).
  • Mode switch for selecting desired output characteristics.
  • 115V, 15 amps, duplex auxiliary power receptacle – (60 Hz models) makes it easy to power lights, grinders and other shop tools at your work station.
  • Flat-top case with a small footprint can be placed under a workbench or stacked up to 3 high on top of each other.
  • Windings and rectifiers are protected against moisture and corrosive environments.
  • Seven-year warranty on power rectifier.

The VRD™ (Voltage Reduction Device™) provides an additional measure of safety, especially when working in an environment with a higher risk of electrical shock such as wet areas and hot, humid, sweaty conditions. The VRD™ reduces the OCV (open circuit voltage) at the welding output terminals while not welding to less than 2 volts DC. Indicator lights will also signal when output voltage during welding is above or below 30 volts DC.

Use of VRD™ does not degrade the DC600 machine rating or the ability to drive current through cables up to 200 ft. (61 m). No new welding techniques are required. The internal system does not require separate modules to operate (available on select models).

  • Stick
  • TIG
  • MIG
  • Flux-Cored
  • Submerged Arc
  • Gouging

Input Power: 380-415/3/50/60
Rated Output: 600A/44V/100% 680A44V/60%
Input Current: 67-62A
Output Range: CV:70A/13V – 780A/44V CC:90A/24V – 780A/44V
Dimensions (H x W x D): 30.75 in x 22.25 in x 39 in (781 mm x 567 mm x 988 mm)
Net Weight: 554.00 (251.29 kg) 

Not what you were after – choose from our other equipment below:

10kg electrode oven
350 pro powersource
aspect 300 acdc tig machine
bugo welding system machine
DC400 powersource
dc600 powersource
flextec 650 powersource
invertec sst2
lancing machine system
ln8 wire feeder
ln9 wire feeder
ln25 pro wire weeder
lt7 subrac tractor
mb190 fume extractor
plasma cutter 40mm cutting capasity
powertec 1350s
powertec 1500s
powerwave 455 power feed
s10 stainless cleaner
s 150h electrode oven
straight line cutter
v160tp d hf tig machine
vantage 400
vantage 580